When it comes to protecting the interior of your home from the sun’s harsh UV rays, one of the best choices available is residential UV window film. Installing residential UV window film can be a simple and relatively straightforward process, but there are a few considerations and tips that you should be aware of before you begin. In this blog post, we will discuss the basics of installing residential UV window film, including what materials you will need, how to properly measure and cut the film, and how to clean the surface of your windows correctly before you begin. With the right information, this project can be completed quickly and relatively easily, and you can start enjoying the benefits of residential UV window film in no time.
The Benefits of Installing Residential UV Window Film
There are numerous advantages to installing residential UV window film, particularly when it comes to protecting your home and family from the harmful effects of the sun’s ultraviolet (UV) rays. UV window film not only helps to reduce energy costs and improve comfort, but it also reduces the amount of UV rays entering your home, preventing fading and degradation of furniture, carpets, artwork, and other surfaces. Residential UV window film can help prevent skin cancer and other health risks associated with excessive sun exposure by blocking out these invisible rays. Furthermore, residential UV window film installation is relatively simple and inexpensive, making it an advantageous home improvement for any homeowner.
Table of Contents:
- Measure Window Correctly
- Clean Window Thoroughly
- Cut Film to Size
- Apply Film to Window
- Trim Off Excess Film
Measure Window Correctly
Before installing your UV window film, you must measure the window correctly. Measure the length and width of the entire window frame, including the top and sides. If the window has a sill, measure the width and length of the sill as well. Be sure to measure in inches and record your measurements on a piece of paper for easy reference. If you have an odd-shaped window, measure each side separately and make a diagram of the window before recording your measurements. This will ensure that you have the correct dimensions for your window film.
Clean Window Thoroughly
Before installing residential UV window film, it is important to make sure that the window is thoroughly clean. Begin by removing any dirt and debris from the window using a soft cloth. Next, you will want to use a window cleaner and a clean microfiber cloth to remove any streaks or smudges. Wipe the window in a circular motion until it is completely clean. Cleaning the window properly will ensure that the film adheres properly and will leave you with a professional-looking finish.
Cut Film to Size
It is important to make sure that the window film you have purchased is cut to size for the window you are installing it on. First, measure each window that you plan to install the window film on, and then order window film that is slightly larger than the measurements you took. If the window film is not cut to size, it is possible that it will not adhere properly to the window, or will look unattractive. Use a ruler and a razor knife to carefully cut the film to size. Make sure that you cut the film evenly and that there are no sharp edges.
Apply Film to Window
Installing residential window film is a relatively simple DIY project that can be completed in just a few hours with the right tools and materials. The first step is to prepare the window and measure the film. Clean the window thoroughly and measure the size of the window the film will be covering. Use a tape measure and take both the width and the height measurements. Once you have your measurements, cut the film to size using a sharp utility knife and a straightedge. Next, attach a corner of the film to the window with a small amount of soapy water. Slowly smooth the film out over the window and use a squeegee to remove any air bubbles. Finally, trim off any excess film around the edges of the window.
Trim Off Excess Film
After the film has been applied to the window, you must trim off any excess film with a razor blade. Carefully run the blade over the edges of the window film to ensure that the film is flush with the window frame. It’s important to exercise caution when trimming the film, as to not cut into the film or window frame. Once you’ve trimmed the excess film, you can use a squeegee to smooth down the film and make sure it adheres to the window frame.
Installing residential UV window film is a great way to reduce energy costs and enjoy the benefits of natural light without the harm of UV rays. It requires patience, skill and the right tools. But with the right preparation and attention to detail, you can ensure your window film installation is successful. Doing the job yourself does not only save money, but also gives you the satisfaction of a job well done.
