In this blog post, we will walk you through the process of tinting your garage door windows with ease. You’ll never ask yourself how to tint garage door windows? Whether you are looking to improve privacy, reduce heat, or simply enhance the appearance of your garage, tinting the windows is an affordable and practical solution. Let’s dive in!
Table of Contents
1. Tools and Materials
Before getting started, it’s essential to gather the necessary tools and materials. Here’s what you’ll need:
Window Tint: Choose a high-quality window tint film that suits your desired level of privacy and heat reduction. There are various types available, including dyed, metalized, and ceramic films. Make sure to select a film that’s compatible with your garage door windows.
Tools: You’ll need a few basic tools to complete the job, such as a utility knife, a squeegee, a spray bottle filled with a water and soap solution, a ruler, and a clean cloth or paper towel.
2. Preparation
Start by cleaning your garage door windows thoroughly. Use a glass cleaner and a microfiber cloth to remove any dirt, dust, and smudges. This step is crucial to ensure that the tint adheres properly and looks great.
Measure your garage door windows and cut the window tint film to the appropriate size. Make sure to leave an extra inch around each side for easier handling during the application process.
3. Tint Application
With your windows clean and your tint film ready, it’s time to apply the tint:
Step 1: Spray the window with the water and soap solution. This will allow you to easily slide and adjust the tint film as you apply it.
Step 2: Carefully peel the protective backing from the tint film, revealing the adhesive side. As you do this, spray the adhesive side with the water and soap solution.
Step 3: Position the tint film on the window, making sure the adhesive side is facing the glass. Slide the film into place, aligning it with the edges of the window.
Step 4: Use the squeegee to remove any air bubbles and excess water from under the film. Start at the center and work your way outwards to the edges.
Step 5: Trim any excess film using the utility knife and a ruler to ensure a clean and precise edge.
Step 6: Use a clean cloth or paper towel to wipe down the window and remove any remaining water and soap solution.
Allow the tint to dry and cure for at least 24 hours before cleaning the windows or using any window treatments. Congratulations, you’ve successfully tinted your garage door windows!
